Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[BrianTRice@gmail.com]

I'm busy collecting stuff for my 2 Eltek HE charger setup (Thanks Remmie for all your work, Ronen, Burton and TomerBA for the shopping list  ) and was wondering if the two little pins in the middle of the brown Anderson connector should be wired or not. I believe the chargers from Holywood Electrics are using them?

Yes, they are. Evtricity figured out what's going on at least for 2014 models here:
http://electricmotorcycleforum.com/boards/index.php?topic=6167.msg48993#msg48993

Also copied to the wiki (end of the Charger section):
http://zeromanual.com/index.php/Unofficial_Service_Manual#Charger

[wijnand71]

Really? Isn't he talking about another connector? I'm talking about the Brown Aux port. And I leave my onboard charger just in place and use this one to close the contactor. Parallel to this I want to charge via this brown Aux port. In the posts of Remmie I can't find any hints about the usage of these middle pins..

[BrianTRice@gmail.com]

Sure, it's not a direct recipe for emulation. I don't have verified information to relay.

[remmie]

Really? Isn't he talking about another connector? I'm talking about the Brown Aux port. And I leave my onboard charger just in place and use this one to close the contactor. Parallel to this I want to charge via this brown Aux port. In the posts of Remmie I can't find any hints about the usage of these middle pins..

As described in the other threads : I don't use the middle pins. I let the onboard charger activate the contactor and just use the 2 main contacts of the brown aux charging connector