Here is what i have for sale:
Motor:
SOLD 1-Agni 95R 30kW, top shape near new: 750$ ( retail 1500$)
2-Agni 95R 30kW, top shape 1500km : 700$ ( retail 1500$)
I want to warn about buying from Doctorbass. I bought a motor from him 2013, the one he describe as in "top shape, near new".
The shipping was delayed, the reason was "commutator need to be cleaned, and brushes need to be changed", here should first warning bell be ringing... Near new motor need new brushes and cleaning...
But ok. I needed a motor to future build. After several weeks I received my motor and tested it with a car battery. no problems. It spins fine.
Now when I finally manufactured a mount plate for motor and mounted motor in my motorcycle frame I accidentally found that I have my battery pack voltage on the frame and motor shaft. I measured resistance between motor shaft and motor terminals and there is 300 Ohms, I also measured with isolation tester at 250V and get below 1. It means I have no isolation between motor shaft and commutator.
According to Cedric Lynch, Jozztek, and Alltrax the motor is fault and need new armature. Shaft need to be isolated. But according to Doctorbass there is no problems with this motor, "he used it self few month in his Zero".
His solution to my problem? Install a grounded brush to motor shaft to get rid of battery voltage there. That on motor described as top shape, near new.
So if you want problems buy a motor from him.