ElectricMotorcycleForum.com

  • November 13, 2024, 12:30:54 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Pages: [1]

Author Topic: Experia/GIVI side case framework  (Read 329 times)

Commodore

  • Newbie
  • *
  • Posts: 43
    • View Profile
Experia/GIVI side case framework
« on: October 20, 2024, 12:35:58 AM »

Just back from a wonderful 800 mile ride to the St. Lawrence River, the Antique Boat Museum, and Boldt Castle.  Worth a ride if you are into that kind of stuff.

For a short hop, I didn't wear earplugs, and heard an unusual racket coming from behind.  Upon examination, I found that two of the four bolts holding the sidecase racks to the seat subframe were missing, and the other two were loose.  Could have been quite the disaster had they all let loose.

Luckily found a well-stocked hardware store which had the correct metric bolts, and some Loctite.  Continued trip without incident.  But you might want to check yours to make sure you don't have the same problem.

After eleven motorcycles, the Experia is by far my favorite.  Ride quality (low weight distribution, handling, acceleration, functionality), mileage, and looks are superior.  I hope some knight in shining armor comes along to save Energica, and the Feds skin, draw and quarter that MOFucking leach Ideanomics and all its executives.
Logged

Grauteufel

  • Jr. Member
  • **
  • Posts: 72
    • View Profile
Re: Experia/GIVI side case framework
« Reply #1 on: October 20, 2024, 05:02:22 AM »

I’m really loving the vitriol for ideamonics and it’s senior personnel. It’s nice to see blame appropriately attributed.

Not energica, but shad, I’ve had fixings for cases work loose as well. I guess it should be one of those periodic check we undertake.
Logged

SilentPea

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Experia/GIVI side case framework
« Reply #2 on: October 21, 2024, 02:32:03 AM »

I've been fighting the front fasteners on the top rack plate (between the rack and the passenger seat).
Have to reapply blue threadlock and tighten every 500-1000mi. Need to figure out if I can get better solution long term.
Maybe switch to red or longer fasteners with a bonus nylock.
Logged

Grauteufel

  • Jr. Member
  • **
  • Posts: 72
    • View Profile
Re: Experia/GIVI side case framework
« Reply #3 on: October 21, 2024, 04:37:10 AM »

I've only ever used the red locktite, 222 I believe. Once applied never had a problem of backing off, and a sharp tap or a little heat breaks it for removal
Logged
Pages: [1]