Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Kappi]

Hey everybody, I recently attached the OEM to my SR (S/DS platform) and the left side bracket which attaches to the passenger footpeg now blocks the Anderson Plug. Is there a trick to making it fit?
Thanks for your input.

Greetings
Kappi

[Kappi]

Ok, problem is McGyverd away: After removing one of the two screws in the Anderson receptible on the bike, I can rotate the socket far enough to get the Anderson Plug in, so I am not sitting beside the charging station like a starving man besides a can without opener, however, there must be a more decent solution to the problem.
Any ideas around?

[DonTom]

Hey everybody, I recently attached the OEM to my SR (S/DS platform) and the left side bracket which attaches to the passenger footpeg now blocks the Anderson Plug. Is there a trick to making it fit?
Thanks for your input.

Greetings
Kappi

Either make or buy & install an extension for the Anderson. Here is what I did to both my 2017 DS and 2017 SR:

[Kappi]

Thanks Don, I'll try something like your solution.

[DonTom]

Thanks Don, I'll try something like your solution.

I can charge my 2017 SR at ten KW with the four connectors shown. A 1KW Delta Q on each of the larger Andersons, A 3.3 KW charger on each of the smaller Andersons below (that the red and black wires go to) and along with the 1.4KW  OBC. That is a total of 10KW.


The smaller Andersons are wired to the motor controller.


-Don-  Auburn, CA