Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[flynnstig82r]

I just wanted to make a public service announcement that I was able to put the low SR/S footpegs on my 2017 SR using the existing bolt and spring, with no modifications necessary. Thanks to Electric Cowboy for suggesting that they should fit.

I have only ridden a short distance since putting them on and the riding position didn't feel much different yet, but I am willing to bet that I will notice when I take a longer ride, as knee comfort was my biggest complaint about the stock SR riding position.

[DonTom]

I just wanted to make a public service announcement that I was able to put the low SR/S footpegs on my 2017 SR using the existing bolt and spring, with no modifications necessary. Thanks to Electric Cowboy for suggesting that they should fit.

Where did you get the SR/S footpegs?

-Don-  Reno, NV

[JaimeC]

I just wanted to make a public service announcement that I was able to put the low SR/S footpegs on my 2017 SR using the existing bolt and spring, with no modifications necessary. Thanks to Electric Cowboy for suggesting that they should fit.

Where did you get the SR/S footpegs?

-Don-  Reno, NV

Since they're a stock part, I'm assuming they can be ordered from AF-1 like any other Zero part you might need.

[flynnstig82r]

One would think so. I got them from SF Moto, my local Zero dealer, but AF1 probably has them too. I paid about $20 for them.

[valnar]

Pics?

[DonTom]

One would think so. I got them from SF Moto, my local Zero dealer, but AF1 probably has them too. I paid about $20 for them.

All I could find at AF1 was these.


-Don-  Reno, NV

[JaimeC]

One would think so. I got them from SF Moto, my local Zero dealer, but AF1 probably has them too. I paid about $20 for them.

All I could find at AF1 was these.


-Don-  Reno, NV

That looks like the right part but for a helluva lot more than just $20.00.  Somebody's parts department screwed up somewhere...

[flynnstig82r]

Here are the part numbers

[dittoalex]

https://www.af1racing.com/Zero-75-Inch-Lowering-Pegs-for-Stock-Rearsets comes with modified brake lever.  Interested in hearing if it will be needed or even fit on the SR.

[DonTom]

Here are the part numbers

Thanks, but the buggy software on AF1 Racing will not let me order anything. It says my password is wrong. I use recover and it says it sends me an email with the code, but it never sends it, but my email is correct there.

I finally got myself locked out.

-Don-  Reno, NV

[DonTom]

It finally  sent a link to my email and when I went to use the link it says:

"Wrong password recovery token"

Whatever that means.

-Don-  Reno, NV

[DonTom]

Okay, I got them ordered. 27-08139 and 27-08140.


"Wrong Token"  meant I tried  twice but used the first link as the 2nd link was a lot slower to get to my email. When the 2nd link  finally did, I was able to use it to get a link to a new password.

So the real problem was it was very slow to get to my email. More than five minutes.

-Don-  Reno, NV

[flynnstig82r]

https://www.af1racing.com/Zero-75-Inch-Lowering-Pegs-for-Stock-Rearsets comes with modified brake lever.  Interested in hearing if it will be needed or even fit on the SR.

I’m a little surprised that a modified lever is needed for the SR/F. I haven’t lowered the lever yet but it seems pretty straightforward according to the unofficial manual. Right now it’s a little high but not unusable. I wouldn’t want to hover my foot over it for more than a few minutes but for normal use it’s not a problem. I’ll try to make the adjustment this weekend and report back.

[dittoalex]

Is a modified rear brake lever needed?

[DonTom]

Is a modified rear brake lever needed?

Not for my 2017 SR. I put them on before I left for Reno last time and I do not notice any difference when I use the rear brake.


But I do notice a little difference in the foot peg position,  now  being a bit better.


-Don-  Auburn, CA