Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[shayan]

Does anyone know the exact measurements of the front fender (2018 Zero S)?
I'm trying to check with the www.ionemoto.com/ guys to see if any of the aero front fenders can fit my bike. And also how wide is the fender if someone has already measured it?

[BrianTRice@gmail.com]

This is a good question. Here's the unofficial manual article I'd update for this: https://zeromanual.com/wiki/Gen2/Front_Fender

I have had brackets made on my DSR to support the SR front fender (see https://zeromanual.com/wiki/Low_Front_Fender_Swap), and so somewhere I know the bolt hole pattern and width, but maybe I can get it off of my current bike.

[shayan]

Thanks Brian, it would be great to get it off of the current bike! The only measurement tool i have is a tape and that gives no good measurement for this and i think i would need something better to get an accurate measurement.

[BrianTRice@gmail.com]

I have some decent calipers for tasks like this, so I'll see what I can do. I'll try to spend a half hour today for this, just need to take off the fork guards to measure everything down to the millimeter and update the manual.

If I'm really lucky, I'll find a spare sport fender in my parts bins, but I don't recall having one after the accident.

[BrianTRice@gmail.com]

I've updated the Front Fender article with the measurements, also here for convenience:

The mounting uses 4 (2 per side) M5x15 bolts with a black finish, with a 3mm Allen/hex key (H3) drive with black plastic washers.
The holes are 84mm apart (centerline-to-centerline), and the width across the brackets measured from the outside face is 192mm across the wheel (taken from a 2020 DSR).

[shayan]

Awesome thanks Brian! Let me respond to them with these and check if thats enough information to find a potential match. I am basically hoping they can find one of their streamliner drag fenders that can match this or even an OEM low drag fender (highly unlikely).

[BrianTRice@gmail.com]

Oh, please let us know if you find a good candidate, for the manual.