But: Does your "Range to Empty" read out seem more reasonable now?
I guess that depends upon how fast I will be riding. Since most of the time I don't ride much at freeway speeds and typically ride at around 40 mph, I am pretty sure that the range estimator will become more optimistic once I start riding locally again. So the answer to your question is that I don't know, yet. But I will keep tabs on the estimator display and will report back once I get a feel for what it is doing when I go back to using my Zero for local trips, which is more normal usage for me.
I might add that I was very careful when riding yesterday. I rode freeway frontage roads, along mountain highways and then up the Coast Highway. I rode up and down a lot of hills. On the frontage roads I traveled about 45 mph. Up hill I rode at around 35 mph. I coasted down many miles with the throttle off. When I arrived at Big Basin SP the display was showing 62%. When I took the same trip on my 2014 S the display showed 50%. But on that bike, I averaged 45 mph coming back on the Coast Highway, while on my 2018 Zero, I averaged 55 mph.
It took 15.1 kWh to fully recharge my pack on this ride, while it took 13.75 kWh to fully recharge my 2014 Zero S with PT's battery pack after my 140 mile ride in 2014. So I guess there has been some improvement to the total pack's capacity, or my ability to squeeze power from my battery pack during a ride.
I forgot to mention that the average watts per mile used yesterday, according to the Zero app, was 668. So as you can see, I was very conservative with my throttle usage.