Hello everyone I had a problem today with my original calex charger for the second time in 2 years! I put the iec c13 on the bike and a clack is heard. I tested again and my AC breaker cuts off as I connect the C13 plug to the bike.
I sent the newspaper to zero and to my dealer I wait for news!
I downloaded the MBB newspaper can you tell me if you notice something like a mass somewhere or other?
thank you
laurent
07462 0 DEBUG: Reset: Power-On, External
07463 0 Power On Key Switch
07464 0 Key On
07465 0 DEBUG: Module scheme changed from None mode to Stopped mode
07466 0 Module 00 Opening Contactor vmod: 0.000V, batt curr: 0A
07467 0 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07468 0 DEBUG: Module scheme changed from Stopped mode to Running mode
07469 0 DEBUG: Module scheme changed from Running mode to Stopped mode
07470 1 Module 00 CAN Link Up
07471 1 Module 00 Registered serial: 16qd2613, vmod: 106.160V
07472 05/18/2018 05:04:28 Sevcon Turned On
07473 05/18/2018 05:04:29 Sevcon CAN Link Up
07474 05/18/2018 05:04:29 Sevcon not ready to be checked for 11kW, Disabling Bike until a battery has connected and we can check the sevcon
07475 05/18/2018 05:04:29 DEBUG: Sevcon Contactor Drive ON.
07476 05/18/2018 05:04:29 Module 00 Closing Contactor vmod: 106.156V, maxsys: 106.177V, minsys: 106.177V, diff: 0.000V, vcap: 93.062V, prechg: 87%
07477 05/18/2018 05:04:30 Controller was already setup for 11kW
07478 05/18/2018 05:04:30 DEBUG: Module 00 Contactor is now Closed
07479 05/18/2018 05:04:30 INFO: Enabling External Chg 0 Charger 2
07480 05/18/2018 05:04:30 INFO: Enabling External Chg 1 Charger 3
07481 05/18/2018 05:04:37 Disarmed PackTemp: h 17C, l 17C, PackSOC: 67%, Vpack:106.147V, MotAmps: 0, BattAmps: 2, Mods: 01, MotTemp: 23C, CtrlTemp: 17C, AmbTemp: 18C, MotRPM: 0, Odo: 8150km
07482 05/18/2018 05:05:37 Disarmed PackTemp: h 17C, l 17C, PackSOC: 67%, Vpack:106.125V, MotAmps: 0, BattAmps: 2, Mods: 01, MotTemp: 24C, CtrlTemp: 17C, AmbTemp: 18C, MotRPM: 0, Odo: 8150km
07483 05/18/2018 05:06:37 Disarmed PackTemp: h 17C, l 17C, PackSOC: 67%, Vpack:106.110V, MotAmps: 0, BattAmps: 2, Mods: 01, MotTemp: 24C, CtrlTemp: 17C, AmbTemp: 18C, MotRPM: 0, Odo: 8150km
07484 05/18/2018 05:06:40 External Chg 0 Charger 2 Connected
07485 05/18/2018 05:06:40 DEBUG: Module scheme changed from Stopped mode to Charging mode
07486 05/18/2018 05:06:40 DEBUG: Module mode Change Does Not Require Disconnect
07487 05/18/2018 05:06:40 INFO: Disabling External Chg 0 Charger 2
07488 05/18/2018 05:06:42 INFO: Enabling External Chg 0 Charger 2
07489 05/18/2018 05:06:50 Charging PackTemp: h 17C, l 17C, AmbTemp: 18C, PackSOC: 67%, Vpack:106.008V, BattAmps: 2, Mods: 01, MbbChgEn: Yes, BmsChgEn: No
07490 05/18/2018 05:06:52 Key Off
07491 05/18/2018 05:16:50 Charging PackTemp: h 18C, l 17C, AmbTemp: 18C, PackSOC: 71%, Vpack:108.413V, BattAmps: 0, Mods: 01, MbbChgEn: Yes, BmsChgEn: No
07492 05/18/2018 05:17:01 External Chg 0 Charger 2 Disconnected
07493 05/18/2018 05:17:01 DEBUG: Module scheme changed from Charging mode to Stopped mode
07494 05/18/2018 05:17:01 DEBUG: Module mode Change Does Not Require Disconnect
07495 05/18/2018 05:17:01 Power Off Unknown
07496 05/18/2018 05:17:01 Sevcon Turned Off
07497 05/18/2018 05:17:01 Module 00 Opening Contactor vmod: 108.408V, batt curr: 0A
07498 05/18/2018 05:17:01 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07499 05/18/2018 05:17:02 INFO: Disabling External Chg 0 Charger 2
07500 05/18/2018 05:17:02 INFO: Disabling External Chg 1 Charger 3
07501 0 DEBUG: Reset: Power-On, External
07502 0 Power On Onboard Charger
07503 0 Calex 720W Charger 0 Connected
07504 0 Calex 1200W Charger 1 Connected
07505 0 DEBUG: Module scheme changed from None mode to Charging mode
07506 0 Module 00 Opening Contactor vmod: 0.000V, batt curr: 0A
07507 0 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07508 0 Module 00 CAN Link Up
07509 0 Module 00 Registered serial: 16qd2613, vmod: 108.131V
07510 05/18/2018 05:17:47 Module 00 CAN Link Down
07511 05/18/2018 05:17:47 Module 00 CAN Link Up
07512 05/18/2018 05:17:48 Sevcon Turned On
07513 05/18/2018 05:17:49 Sevcon CAN Link Up
07514 05/18/2018 05:17:50 Sevcon not ready to be checked for 11kW, Disabling Bike until a battery has connected and we can check the sevcon
07515 05/18/2018 05:17:50 DEBUG: Sevcon Contactor Drive ON.
07516 05/18/2018 05:17:50 Module 00 Closing Contactor vmod: 108.119V, maxsys: 108.135V, minsys: 108.135V, diff: 0.000V, vcap: 95.562V, prechg: 88%
07517 05/18/2018 05:17:50 Controller was already setup for 11kW
07518 05/18/2018 05:17:50 DEBUG: Module 00 Contactor is now Closed
07519 05/18/2018 05:17:50 INFO: Enabling Calex 720W Charger 0
07520 05/18/2018 05:17:50 INFO: Enabling Calex 1200W Charger 1
07521 05/18/2018 05:17:50 INFO: Enabling External Chg 0 Charger 2
07522 05/18/2018 05:17:50 INFO: Enabling External Chg 1 Charger 3
07523 05/18/2018 05:17:57 Charging PackTemp: h 18C, l 17C, AmbTemp: 18C, PackSOC: 75%, Vpack:108.093V, BattAmps: 0, Mods: 01, MbbChgEn: Yes, BmsChgEn: No
07524 05/18/2018 05:18:01 Calex 720W Charger 0 Disconnected
07525 05/18/2018 05:18:01 INFO: Disabling Calex 720W Charger 0
07526 05/18/2018 05:18:07 Calex 1200W Charger 1 Disconnected
07527 05/18/2018 05:18:07 Power Off Onboard Charger
07528 05/18/2018 05:18:07 Sevcon Turned Off
07529 05/18/2018 05:18:07 Module 00 Opening Contactor vmod: 107.974V, batt curr: 1A
07530 05/18/2018 05:18:07 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07531 05/18/2018 05:18:07 INFO: Disabling Calex 1200W Charger 1
07532 05/18/2018 05:18:07 INFO: Disabling External Chg 0 Charger 2
07533 05/18/2018 05:18:07 INFO: Disabling External Chg 1 Charger 3
07534 0 DEBUG: Reset: Power-On, External
07535 0 Power On Key Switch
07536 0 Key On
07537 0 DEBUG: Module scheme changed from None mode to Stopped mode
07538 0 Module 00 Opening Contactor vmod: 0.000V, batt curr: 0A
07539 0 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07540 0 DEBUG: Module scheme changed from Stopped mode to Running mode
07541 0 Module 00 CAN Link Up
07542 0 Module 00 Registered serial: 16qd2613, vmod: 107.982V
07543 05/18/2018 05:18:42 DEBUG: Module scheme changed from Running mode to Stopped mode
07544 05/18/2018 05:18:43 Sevcon Turned On
07545 05/18/2018 05:18:45 Sevcon CAN Link Up
07546 05/18/2018 05:18:45 Sevcon not ready to be checked for 11kW, Disabling Bike until a battery has connected and we can check the sevcon
07547 05/18/2018 05:18:45 DEBUG: Sevcon Contactor Drive ON.
07548 05/18/2018 05:18:45 Module 00 Closing Contactor vmod: 107.977V, maxsys: 108.002V, minsys: 108.002V, diff: 0.000V, vcap: 95.687V, prechg: 88%
07549 05/18/2018 05:18:45 Controller was already setup for 11kW
07550 05/18/2018 05:18:45 DEBUG: Module 00 Contactor is now Closed
07551 05/18/2018 05:18:45 INFO: Enabling External Chg 0 Charger 2
07552 05/18/2018 05:18:45 INFO: Enabling External Chg 1 Charger 3
07553 05/18/2018 05:18:52 Disarmed PackTemp: h 18C, l 17C, PackSOC: 74%, Vpack:107.960V, MotAmps: 0, BattAmps: 1, Mods: 01, MotTemp: 23C, CtrlTemp: 18C, AmbTemp: 18C, MotRPM: 0, Odo: 8150km
07554 05/18/2018 05:18:59 DEBUG: Module scheme changed from Stopped mode to Running mode
07555 05/18/2018 05:18:59 DEBUG: Module mode Change Does Not Require Disconnect
07556 05/18/2018 05:19:09 DEBUG: Module scheme changed from Running mode to Stopped mode
07557 05/18/2018 05:19:09 DEBUG: Module mode Change Does Not Require Disconnect
07558 05/18/2018 05:19:28 Power Off Key Switch
07559 05/18/2018 05:19:28 Sevcon Turned Off
07560 05/18/2018 05:19:28 Module 00 Opening Contactor vmod: 107.911V, batt curr: 1A
07561 05/18/2018 05:19:28 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07562 05/18/2018 05:19:28 INFO: Disabling External Chg 0 Charger 2
07563 05/18/2018 05:19:28 INFO: Disabling External Chg 1 Charger 3
07564 0 DEBUG: Reset: Power-On, External
07565 0 Power On Key Switch
07566 0 Key On
07567 0 DEBUG: Module scheme changed from None mode to Stopped mode
07568 0 Module 00 Opening Contactor vmod: 0.000V, batt curr: 0A
07569 0 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07570 0 DEBUG: Module scheme changed from Stopped mode to Running mode
07571 0 Module 00 CAN Link Up
07572 0 Module 00 Registered serial: 16qd2613, vmod: 107.835V
07573 05/18/2018 05:24:43 DEBUG: Module scheme changed from Running mode to Stopped mode
07574 05/18/2018 05:24:44 Sevcon Turned On
07575 05/18/2018 05:24:45 Sevcon CAN Link Up
07576 05/18/2018 05:24:45 Sevcon not ready to be checked for 11kW, Disabling Bike until a battery has connected and we can check the sevcon
07577 05/18/2018 05:24:46 DEBUG: Sevcon Contactor Drive ON.
07578 05/18/2018 05:24:46 Module 00 Closing Contactor vmod: 107.830V, maxsys: 107.880V, minsys: 107.880V, diff: 0.000V, vcap: 94.875V, prechg: 87%
07579 05/18/2018 05:24:46 Controller was already setup for 11kW
07580 05/18/2018 05:24:46 DEBUG: Module 00 Contactor is now Closed
07581 05/18/2018 05:24:46 INFO: Enabling External Chg 0 Charger 2
07582 05/18/2018 05:24:46 INFO: Enabling External Chg 1 Charger 3
07583 05/18/2018 05:24:53 Disarmed PackTemp: h 18C, l 17C, PackSOC: 74%, Vpack:107.827V, MotAmps: 0, BattAmps: 2, Mods: 01, MotTemp: 23C, CtrlTemp: 18C, AmbTemp: 18C, MotRPM: 0, Odo: 8150km
07584 05/18/2018 05:25:53 Disarmed PackTemp: h 18C, l 17C, PackSOC: 74%, Vpack:107.803V, MotAmps: 0, BattAmps: 1, Mods: 01, MotTemp: 24C, CtrlTemp: 18C, AmbTemp: 18C, MotRPM: 0, Odo: 8150km
07585 05/18/2018 05:26:53 Disarmed PackTemp: h 18C, l 17C, PackSOC: 74%, Vpack:107.786V, MotAmps: 0, BattAmps: 2, Mods: 01, MotTemp: 24C, CtrlTemp: 18C, AmbTemp: 18C, MotRPM: 0, Odo: 8150km
07586 05/18/2018 05:27:02 Power Off Key Switch
07587 05/18/2018 05:27:02 Sevcon Turned Off
07588 05/18/2018 05:27:02 Module 00 Opening Contactor vmod: 107.785V, batt curr: 1A
07589 05/18/2018 05:27:02 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07590 05/18/2018 05:27:02 INFO: Disabling External Chg 0 Charger 2
07591 05/18/2018 05:27:02 INFO: Disabling External Chg 1 Charger 3
07592 0 DEBUG: Reset: Power-On, External
07593 0 Power On Key Switch
07594 0 Key On
07595 0 DEBUG: Module scheme changed from None mode to Stopped mode
07596 0 Module 00 Opening Contactor vmod: 0.000V, batt curr: 0A
07597 0 Module 01 Opening Contactor vmod: 0.000V, batt curr: 0A
07598 0 DEBUG: Module scheme changed from Stopped mode to Running mode
07599 0 Module 00 CAN Link Up
07600 0 Module 00 Registered serial: 16qd2613, vmod: 107.771V
07601 05/18/2018 05:36:07 Module 00 CAN Link Down
07602 05/18/2018 05:36:07 DEBUG: Module scheme changed from Running mode to Stopped mode
07603 05/18/2018 05:36:08 Module 00 CAN Link Up
07604 05/18/2018 05:36:09 Sevcon Turned On
07605 05/18/2018 05:36:10 Sevcon CAN Link Up
07606 05/18/2018 05:36:10 Sevcon not ready to be checked for 11kW, Disabling Bike until a battery has connected and we can check the sevcon
07607 05/18/2018 05:36:10 DEBUG: Sevcon Contactor Drive ON.
07608 05/18/2018 05:36:10 Module 00 Closing Contactor vmod: 107.769V, maxsys: 107.784V, minsys: 107.784V, diff: 0.000V, vcap: 94.687V, prechg: 87%
07609 05/18/2018 05:36:11 Controller was already setup for 11kW
07610 05/18/2018 05:36:11 DEBUG: Module 00 Contactor is now Closed
07611 05/18/2018 05:36:11 INFO: Enabling External Chg 0 Charger 2
Author
Topic: Calex charger failed (Read 616 times)