Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cleffjark717]

Hey everyone.  I'm Jeff.

I'm hoping to sell the race fairings I used on my Zero SR last year and Maria from Hollywood Electrics used this year.  I am racing a different bike now and I don't use the fairings any more.  These fairings are fiberglass race fairings for a 2008-2012 CBR1000RR.  I had brackets made to adapt them to a 2014 Zero SR.  These brackets will work on Zero SR, S, and DS from 2013-2018.  The brackets include a mount for the upper fairing stay, a custom aluminum tail section, an aluminum stiffener for inside the "tank", and other small brackets to stabilize the fairings and mount the seat.  Also included is a CBR seat and a windscreen.  Installation requires installing a couple of threaded inserts under the seat but is straight forward.  Changing from stock to race fairings takes less than 1 hour.  The yellow vinyl stickers on the fairings have faded a lot from when I put them on but the fairings are in good shape with only typical wear from the few race weekends they were used for.  These fairings were never crashed but Maria did tip over!  She didn't damage anything though.

If somebody wanted to install some lights, these fairings could be used on a street legal bike.  The fairings got a lot of attention and looked great on the Zero.  More photos can be seen on the Hollywood Electrics Facebook and Instagram pages.

I would like to get $975 o.b.o for the fairings, windscreen, upper fairing stay, seat and custom brackets and tail section.  Local pickup in the Los Angeles area is preferred because this would be a big box to ship.  Make me an offer please!

feel free to email me with any questions. cleffjark(at)gmail(dot)com

[Testpilot1]

Hey everyone.  I'm Jeff.

I'm hoping to sell the race fairings I used on my Zero SR last year and Maria from Hollywood Electrics used this year.  I am racing a different bike now and I don't use the fairings any more.  These fairings are fiberglass race fairings for a 2008-2012 CBR1000RR.  I had brackets made to adapt them to a 2014 Zero SR.  These brackets will work on Zero SR, S, and DS from 2013-2018.  The brackets include a mount for the upper fairing stay, a custom aluminum tail section, an aluminum stiffener for inside the "tank", and other small brackets to stabilize the fairings and mount the seat.  Also included is a CBR seat and a windscreen.  Installation requires installing a couple of threaded inserts under the seat but is straight forward.  Changing from stock to race fairings takes less than 1 hour.  The yellow vinyl stickers on the fairings have faded a lot from when I put them on but the fairings are in good shape with only typical wear from the few race weekends they were used for.  These fairings were never crashed but Maria did tip over!  She didn't damage anything though.

If somebody wanted to install some lights, these fairings could be used on a street legal bike.  The fairings got a lot of attention and looked great on the Zero.  More photos can be seen on the Hollywood Electrics Facebook and Instagram pages.

I would like to get $975 o.b.o for the fairings, windscreen, upper fairing stay, seat and custom brackets and tail section.  Local pickup in the Los Angeles area is preferred because this would be a big box to ship.  Make me an offer please!

feel free to email me with any questions. cleffjark(at)gmail(dot)com

Wish Zero had done this as a add on kit when I had a DS, liking the look [emoji106]


Sent from my iPad using Tapatalk

[BrianTRice@gmail.com]

I want to document the hell out of the brackets. I'd pay for photos and measurements since acquiring them separately would be a waste.

I'm not sure the front fairing would suit the DS/DSR: the clearance around the larger wheel might be super tight and the clearance to ground is obviously reduced.

[MrDude_1]

Hey everyone.  I'm Jeff.

Hi Jeff.

I have the same fairing sitting in the garage, I would also love to see some pictures of the brackets you worked out.

[Erasmo]

I want to document the hell out of the brackets. I'd pay for photos and measurements since acquiring them separately would be a waste.

I'm not sure the front fairing would suit the DS/DSR: the clearance around the larger wheel might be super tight and the clearance to ground is obviously reduced.

Also you will need to source a new front fender.