Topic: Can't get key to 'lock' position (Read 907 times)

MadwitTY · « **on:** October 24, 2014, 07:35:12 PM »

So I just received my '14 SR a couple days ago. Yesterday I tried to use the fork lock but I can't remove the key. I move the bars all the way to the left, depress and turn the key counter-clockwise; the fork locks, but the key won't go all the way to the 'lock' icon, and I cannot remove my key. Is this a common issue, or do you think it is an issue with the lock cylinder. The bike is a demo model with 1790 miles on it.
Thanks for the help!

Richard230 · « **Reply #1 on:** October 24, 2014, 09:24:36 PM »

Sometimes there is pressure on the lock plunger that can keep the lock from functioning properly when you attempt to move the key to the unlocked position. Try moving the handlebars slightly back and forth while pushing in the key and gently trying to move the key and lock clockwise to the unlocked position. Also using a little light oil, like WD40 or Lock-Ease might help.

ut-zero · « **Reply #2 on:** October 25, 2014, 12:49:17 AM »

A few others have had similar issues.
http://electricmotorcycleforum.com/boards/index.php?topic=3763.msg22884#msg22884

MadwitTY · « **Reply #3 on:** October 25, 2014, 01:19:15 AM »

Awesome, thanks ut-zero. I did a search to see if this was ever mentioned in the forums previously, but I guess I chose the wrong keywords. I will look into this when I get home today.

ElectricMotorcycleForum.com

News:

Author Topic: Can't get key to 'lock' position (Read 907 times)

MadwitTY

Can't get key to 'lock' position

Richard230

Re: Can't get key to 'lock' position

ut-zero

Re: Can't get key to 'lock' position

MadwitTY

Re: Can't get key to 'lock' position