ElectricMotorcycleForum.com

  • June 29, 2024, 12:06:17 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Pages: [1]

Author Topic: Alternative Front fork and wheel for SR-ZF 2017  (Read 417 times)

Skloep

  • Newbie
  • *
  • Posts: 3
    • View Profile
Alternative Front fork and wheel for SR-ZF 2017
« on: June 10, 2024, 04:05:18 PM »

I would like to exchange my front suspension for something with two discs instead of my current one disc set to improve breaking power, but new from Zero is far to expensive.
In my imagination it would be possible to take the front fork and front wheel of another bike with compatible dimensions.
Anyone an idea what would fit? There should be more bikes with upside down front forks that could be made to fit.
Logged

rgutt

  • Full Member
  • ***
  • Posts: 129
    • View Profile
Re: Alternative Front fork and wheel for SR-ZF 2017
« Reply #1 on: June 13, 2024, 05:07:51 AM »

I wish you luck in this endeavor, but fact is that the dimensional data required to determine interchangeability of forks isn't readily available. Shy of people who have leveraged professional machine work to retrofit a set of forks from one bike to another, most fork swaps stay within the same family, i.e. manufacturer wherein someone happened to have both bikes to be able to measure and then disseminate the cross compatibility to the rest of the internet public.

The closest I've been able to find are the forks from an early '00s Kawasaki 636. They are the same size but a different spacing than the Zero, so you'd have to use the entire triple -- and then I have no idea if the triple's spindle is compatible with the Zero neck ... and since the 636 forks are wider apart, they might not fit properly in the Zero's neck area, at least during low speed turning.
Logged

TheRan

  • Hero Member
  • *****
  • Posts: 1502
    • View Profile
Re: Alternative Front fork and wheel for SR-ZF 2017
« Reply #2 on: June 13, 2024, 05:29:18 AM »

If you can find some forks that have the same diameter uppers then you can put them in the Zero triple clamps. A bonus is you won't have to mess about with trying to mount the dash and headlight to different clamps. The issue then is the fork ends will be a different distance apart and the wheel won't just bolt straight in so you'll either need some spacers made or turn down the originals, and then space out the brake calipers to line up (so axial mount and not radial).
Logged

Skloep

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Alternative Front fork and wheel for SR-ZF 2017
« Reply #3 on: June 17, 2024, 04:38:55 PM »

That's what I was afraid of, I probably better leave it the way it is and start saving up for another bike to replace this one. Too bad the second hand value of those Zero motorbikes is so low.
Logged
Pages: [1]