ElectricMotorcycleForum.com

  • October 23, 2024, 07:25:30 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Pages: [1]

Author Topic: I have a banana!  (Read 761 times)

DanielCoffey

  • Jr. Member
  • **
  • Posts: 73
    • View Profile
I have a banana!
« on: October 10, 2022, 07:42:34 PM »

Well it finally happened to me... About 30 minutes after rain, I stopped at a t-junction, moved off and lost rear traction either on the painted line or a greasy spot. Zwipppp! Both me and the bike lying on the floor. No other vehicles involved, fortunately. Drat the simplicity of the 2018 DS!

Goodbye to my right original Givi pannier - the plastic took most of the fall of the bike. I seem to have swapped my front brake lever for a banana and I have been fitted with a more modern two-piece collarbone!

Because it was a fairly rural location there weren't even any vehicles to see my embarassment. I had managed to pick myself up, key off the bike, haul it upright, get it over to the side and retrieve the plastic pannier bits before anybody even drove past.

Apart from the busted pannier, everything on the bike functions. Throttle is free, controls all work. Front brake seems fine too. I took a few minutes for a roadside sit down before going home slowly. By the time I got home the shoulder was really complaining so I went to A&E to discover the tip of the right collarbone has snapped cleanly off but was still held in place so no surgery needed.

I will take advantage of the enforced downtime to get a new brake lever from English Electric Motors, go shopping for a new pair of panniers and get my jacket cleaned and re-waterproofed. It was an Ashley Watson waxed cotton and it needed a bit of tidying up which I never had time for. Now I do.

The D3O pads seemed to do their job because my right hip is fine. I just fell on the part of the shoulder not covered by the shoulder-specific pad.
Logged

princec

  • Hero Member
  • *****
  • Posts: 1219
    • View Profile
Re: I have a banana!
« Reply #1 on: October 10, 2022, 09:36:55 PM »

Ah, the "Vernal Lob".

Hope the TC on the SR/F actually works...

Cas :)
Logged

ESokoloff

  • Hero Member
  • *****
  • Posts: 722
    • View Profile
Re: I have a banana!
« Reply #2 on: October 12, 2022, 08:57:55 AM »

Sorry to read this :(
Having just struck a deer a few weeks ago I emphasize.
Logged
Eric
2016 Zero DSR

DanielCoffey

  • Jr. Member
  • **
  • Posts: 73
    • View Profile
Re: I have a banana!
« Reply #3 on: October 16, 2022, 11:33:34 PM »

Thank you to Alec and the team at English Electric Motor Co for supporting me. New brake lever notified for dispatch only three days after ordering.
Logged

Andrew Zero S

  • Newbie
  • *
  • Posts: 29
    • View Profile
Re: I have a banana!
« Reply #4 on: January 09, 2023, 12:10:50 AM »

You can straighten that brake lever

Heat it with a blowtorch. Mark it with a sharpie wherever you want to bend it. When the sharpie mark evaporates the outside is the right temperature to anneal (I don't know what this means, the guy with the science is here: https://www.advrider.com/f/threads/bent-brake-lever-what-to-do.583878/page-2). Keep heating to heat all the way through, say 5 minutes. Then dunk it in room temoerature water. It will remain "annealed" for some time despite the cooling (only if its aluminium, not if its steel). Now its much easier to handle for straightening and won't melt your rear tyre.
This was all great advice off the net. My inovation was to put the cooled lever in a mole grips (vise grips) and to straighten it by roling over it with the back wheel - it occured to me that it had got bent by a 149 kg bike lying on its side in the back of an estate car (station wagon, un break) and a similiar force would straighten it out.
Logged
Pages: [1]