Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[raystl]

After installation in my plane I’m getting the safety interlock dash flash. A dump shows a Tipover error.
 - Tipover Sensor Vector     :  -21, 152, 196 - 248/256 G
 - Tipover Sensor Roll Angle     :  4
 - Tipover Sensor Pitch Angle    :  54

Curiously, I have not found an orientation of the MBB that removes this error. Even better would be no Tipover interlock that could kill power say on a steep climb after takeoft. Two questions:
Is there a command that disables this interlock?
How can I get access to be able to this and other desirable changes eg. Disable kickstand interlock?

Thanks fro any help/clues.

[Electric Cowboy]

What year powertrain is this?

[raystl]

2018 DSR

[Electric Cowboy]

I was unaware of this being implemented in production machines. I could simply be unaware, but is it possible that you have a prototype setup?

In any case, I would log in and look under the settings to see if you can turn it off, or set the flag to 0 if it is that type of value.

set is the command to see what you have access to.

[raystl]

It appears that this dubious feature was added in 2018. It is covered  in section 4.3 of the operator’s manual. I just checked and found no mention  in the 2017 manual.

Logging in to change  this parameter seems like a good idea. (I would disable ABS too).  Where can I find out how to get access to the necessary passwords?

Thanks

[flattetyre]

I lay my bikes down fairly frequently trying to learn tricks and the first time I dropped the Zero on concrete I had to reboot to get it working again. But I have a 2017 FXS, so I'm not sure what was going on.

Every time I've dropped the zero on dirt I just pick it up again and ride off without a reset.