Electric Motorcycle Forum is live!
This is the torque monster! 300+ lb.-ft.; base speed (and power) depends on what voltage you use. This motor was used in a street motorcycle conversion and ridden approximately 500 miles. Gen 1 housing, includes parts as shown in pictures: waterjet cut motor mounts, sensor cable and oil pan conversion as recommended by Remy engineers. Without this conversion you must use a scavenge pump; with it you can use a smaller and quieter circulating pump. This conversion is reversible: simply unbolt the oil pan and replace with a block-off plate.This motor is well understood by controller manufacturers and I used it with a Rinehart PM100DX. $2500 + shipping. Please contact me if any questions or for additional pictures or information.Application Manual: http://www.neweagle.net/support/wiki/images/archive/a/a6/20140501174637!HVH250_MotorManual20110408.pdf
