Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Duck]

Scissor jack stand is definitely safe for the Zero S. I’ve been using it on my2018 SR. Also, I found a way to use rear stand. Please see pictures.

[TheRan]

Are those the R&G adaptors? I keep meaning to order some.

https://www.rg-racing.com/browsetype/Cotton_Reels/Zero/DSR/CR0081BK/

[Duck]

Yes. They work really well. Put in sliders/spools for added protection.

[TheRan]

I did have sliders that mounted through the axle (front and rear) and ended up taking them off as the handle bar and footpeg end up touching the ground first, at least on my DS. Do they have markings on them for alignment like the stock ones? It doesn't look like they do from the product photos, but I know R&G likes to use 3D printed prototypes for that.

[Duck]

I used to have the axle mounted sliders front and rear but I took them off. For the same reasons.

They have markings for alignment but I measured and marked the swing arm so I know where to start. I also measured the drive belt tension before tightening the axle.

The scissor jack helped me a lot when I replaced the front and rear tires, which I did at the same time, as well as when aligned the front wheel.

I got the Dynamoto stands front and rear. It’s a little bit pricy but it’s worth it to me, having a limited space in our garage. It can place my bike anywhere when needed. I can also use it when I get another bike.