Quick question to the experts in this forum: I own a SR/S Premium with chargetank (12KW charge speed). I live in Germany where we have a 3-phase electric system (220V) and bought the 10% Upgrade (Cypher Store).
If I run a test on a single phase I can see 11% higher charge speed. Currently I can't test on all 3 phases since the Battery temp is too low and SOC too high to max out the charging speed. But I have read before and after the update data from the MBB console during charging.
Before Update:
*************************************************************
* Chargers *
*************************************************************
Charger, En, OUT V, OUT A, IN V, IN A, IN HZ, CMD IN, CMD OUT, Ver, Serial, CANid, Status
3kW , 1, 102.4, 28.6, 219, 14.0, 50, 7, 28, 204, 0, 0x010, 0x0080
3kW , 0, 0.0, 0.0, 0, 0.0, 0, 7, 0, 204, 1923138, 0x011, 0x0020
6kW , 0, 0.0, 0.0, 0, 0.0, 0, 7, 0, 200, 1919058, 0x012, 0x0020
*************************************************************
ZERO MBB>
After Update:
*************************************************************
* Chargers *
*************************************************************
Charger, En, OUT V, OUT A, IN V, IN A, IN HZ, CMD IN, CMD OUT, Ver, Serial, CANid, Status
3kW , 1, 108.8, 29.9, 224, 15.3, 50, 16, 30, 206, 0, 0x010, 0x0080
3kW , 0, 0.0, 0.0, 0, 0.0, 0, 16, 0, 204, 1923138, 0x011, 0x0020
6kW , 0, 0.0, 0.0, 0, 0.0, 0, 16, 0, 200, 1919058, 0x012, 0x0020
*************************************************************
ZERO MBB>
Apparently charger 1 is now on Ver 206, but Charger 2 still on Ver 204. Does someone know if 206 is a requirement for the 10% charge speed increase? In this case I would not get the 10% increase on charger 2?