Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Too little too late]

Anyone ever needed these connectors for the turn signals. And if so, where did you find them. Looking for a source please. 2 male and 2 female for the project.

[TheRan]

Looks like it could be either of these. I don't believe the part number for the first is correct as searching Molex 1625 doesn't return the same connector on any other sites that I could find, but they do offer free samples. They list the pitch as 1.58mm but as it's a single pin connector I think that might possibly be the pin diameter, and the diameter on the second link is ~2.4mm, if you wanted to try and disassemble one of your connectors and measure it.

https://www.lhecn.com/1-pin-connector/
https://vetco.net/products/1-pin-male-female-pair-093-pins-12a

[Too little too late]

Thanks, that really looks right. I couldn't even come close to finding them. Samples? Let me figure out who I am, and who my parts manager is, ha. I'll order a couple from your second link. Thanks again for the lead.

[TheRan]

I've managed to find some other types of connectors for people before. All I do is a Google image search for connectors with however many pins and then scroll through the results until I find a match.

[Too little too late]

I did an image search for connectors, but never thought to specify the number of pins. Thanks for the tip.

[NoMoreIdeas]

Its a Molex barrel connector that uses .062 molex pins. I had the same problem finding them without ordering 100 at a time and just drew one up and printed them. They work great, and another member here has used these successfully as well. If you have a 3d printer - https://www.thingiverse.com/thing:3577909

[Too little too late]

Thanks but no 3D printer here.