Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JaimeC]

https://www.asphaltandrubber.com/recall/zero-srf-loose-rear-brake-rotor-bolts-recall/

[Fred]

Thanks for the heads up. I'll check mine myself whilst waiting for a recall.

Just noticed that my other bike (Hypermotard 950) has a recall at the bottom of that page too.

[Richard230]

The recall says that the new rotor screw torque value should be 26 pound-feet. That sure seem like a lot to me.    I just replaced the six 10mm bolts that retain the front disc on my Royal Enfield and the factory torque value for those fasteners was 19 NM. Hopefully you will still be able to remove them without destroying the screws if necessary in the future. When I removed the screws of my RE, the hex drive socket heads became mangled from the torque required to remove the screws and they all had to e replaced.