Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[DonTom]

I can not find weight capacity information for the stand. Looks stable enough, just make sure you are also using a rear stand.

The hole in the Energica's lower triple tree is 23mm. Looking at the design of the stand if you used a smaller (18mm) pin would cause the upper black tube to carry the load. It would probably be fine but might cause stability issues and fairing clearance problems on an EGO.
Looking at the reviews on this identical stand sold under a different name, it looks like the Pitbull pins may fit. I can measure one of our Pitbull stands on Monday. I have been working with George @ Pitbull to design a pin that will work with our bikes.
https://www.revzilla.com/motorcycle/trackside-universal-head-lift-stand?gclid=&sku_id=1165289

What size pin have you been using? Why is a new size needed?


-Don-  Reno, NV

[Demoni]

What size pin have you been using? Why is a new size needed?

Don I have zero experience with the referenced stand. I was just referencing that a 18mm pin is not the correct size for an Energica. Our bikes have a 23mm hole, the pins on all the stands I have here are22.5-22.75mm.

[DonTom]

Don I have zero experience with the referenced stand. I was just referencing that a 18mm pin is not the correct size for an Energica. Our bikes have a 23mm hole, the pins on all the stands I have here are22.5-22.75mm.

Perhaps they can both use the same size pins. Where can we buy the pins separately  from the stands?


-Don-  CC, NV