Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Zelidar]

As promised, I'm reporting back on the installation of Weiser Technik LED turn signals on my 2020 SR/S.

That's wonderful, many thanks karlh for that information. Exactly what I have been hoping for.

Regarding Weiser that is unfortunately coming about a year too late for me. I still have all 8 boards, but meanwhile bought and mounted aftermarket LED turn signals. So it would appear that setting 0x36 in the accessory_configuration parameter will disable the checks causing the "Error 19: Blinker Bulb Out Fault". Can't wait to try that once I have removed those utterly silly resistors.

[Auriga]

As promised, I'm reporting back on the installation of Weiser Technik LED turn signals on my 2020 SR/S.

That's wonderful, many thanks karlh for that information. Exactly what I have been hoping for.

Regarding Weiser that is unfortunately coming about a year too late for me. I still have all 8 boards, but meanwhile bought and mounted aftermarket LED turn signals. So it would appear that setting 0x36 in the accessory_configuration parameter will disable the checks causing the "Error 19: Blinker Bulb Out Fault". Can't wait to try that once I have removed those utterly silly resistors.

The only downside is that I don't think it can be set unless you are logged in as a dealer or above.

[Shadow]

As promised, I'm reporting back on the installation of Weiser Technik LED turn signals on my 2020 SR/S.  When I took delivery of my bike I made sure I had the latest firmware version at that time, version 17.  I installed the LEDs but got a high flashing rate and error codes, so I removed them and reinstalled the incandescent bulbs.  This week my bike went to my dealer for installation of my Power Tank, so I reinstalled the LEDs and worked with the dealer to make them work properly.  The fix is not a firmware update, but a change to the hexadecimal accesory_configuration parameter in the settings portion of the MBB Console (see https://zeromanual.com/wiki/Gen3/MBB_Console).  The correct value for my bike, an SR/S Premium, is 0x36.  The required values vary depending on charger, heated grips, and LED turn signal installations and can be found in the Zero installation instructions for their own LED turn signals.

0x36 => "00110110"
0x16 => "00010110"


If you know what I mean.

[karlh]

The only downside is that I don't think it can be set unless you are logged in as a dealer or above.
[/quote]

There are threads on this forum that describe how to use an interface cable and terminal software to connect to earlier Zero models, but I don't believe anyone has tried it with an SR/F or SR/S.  I had my accesory_configuration parameter changed at my dealer's shop.  They provided the laptop, software and interface cable, and I provided the value to enter.

[GeneralSP]

There are threads on this forum that describe how to use an interface cable and terminal software to connect to earlier Zero models, but I don't believe anyone has tried it with an SR/F or SR/S.  I had my accesory_configuration parameter changed at my dealer's shop.  They provided the laptop, software and interface cable, and I provided the value to enter.
[/quote]

I tried this with my SRS and (set) command seem to not working. I have the good sheet parameter needed to set the original (led) flasher.

[Auriga]

There are threads on this forum that describe how to use an interface cable and terminal software to connect to earlier Zero models, but I don't believe anyone has tried it with an SR/F or SR/S.  I had my accesory_configuration parameter changed at my dealer's shop.  They provided the laptop, software and interface cable, and I provided the value to enter.

I tried this with my SRS and (set) command seem to not working. I have the good sheet parameter needed to set the original (led) flasher.
[/quote]

By default, non logged in users do not have permissions for that command. For curiosity's sake I tried it on one of the bikes I have here. The command only worked once I had logged in with the dealer tools.

[Zelidar]

I finally found a Zero dealer willing to do that change on my SR/F, that is, putting 0x36 in the accessory_configuration parameter (for a SR/F Premium). Instead of simply trying it out, the other dealer was looking for reasons not to do it, and that over several months. Now I have finally removed those pesky resistors.

[Crissa]

Benefits of being able to find a better dealer!

-Crissa