ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: ESokoloff on October 19, 2017, 05:25:09 PM
-
Any recommendations?
Will theses fit & does anyone have feedback?
https://www.amazon.com/EBC-Brakes-FA209-2V-Sintered/dp/B00666HK0U
I heard that Sintered &/or HH are to be avoided.
True?
TIA.
-
Those will fit. 209 is the shape/size and the suffix denotes the pad material. HH sintered, X carbon etc. EBC are some of the best pads out there IMO. Don't know where you heard not to run sintered or why but I do.
-
Those will fit.
...............
Don't know where you heard not to run sintered or why but I do.
Thanks for the confirmation.
I've read that sintered pads are more susceptible to causing noise.
-
Those will fit.
...............
Don't know where you heard not to run sintered or why but I do.
Thanks for the confirmation.
I've read that sintered pads are more susceptible to causing noise.
My 15FX came with sintered/metallic pads and they were incredibly, horribly noisy when wet. I replaced them with organic (Kevlar). Very quiet and not "grabby". The sintered probably stop quicker, but I'm ok with that.
Sent from my Z982 using Tapatalk
-
Thanks Clay
-
Update the wiki?
https://zeromanual.com/index.php/Unofficial_Service_Manual#Brakes
-
Update the wiki?
https://zeromanual.com/index.php/Unofficial_Service_Manual#Brakes
Added a reference to EBC Carbon X.
Sent from my Z982 using Tapatalk