ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: iJustride on August 23, 2014, 01:47:36 AM

Title: Battery Gauge Stuck At Full, No Regenerative Braking.
Post by: iJustride on August 23, 2014, 01:47:36 AM

Turned on my 2012 ZF6 S yesterday after a full charge. Noticed right away that there was no regen. Tried a few power cycles, nothing. The charging indicator showed 3 of 4 lights but the meter on the dash was full. Didn't charge and ride to work today and I still had full bars. WTF?

Title: Re: Battery Gauge Stuck At Full, No Regenerative Braking.
Post by: protomech on August 23, 2014, 05:17:47 AM

Normally there's no regen after a full charge and balance.

You rode to work today and the battery gauge did not update at a point where it should have removed bars? How many bars do you typically use for your work commute?

Title: Re: Battery Gauge Stuck At Full, No Regenerative Braking.
Post by: iJustride on August 23, 2014, 05:34:45 AM

No regen even after many miles. I loose about two to three bars each way. So I should have been at half full when I plugged in today.