ElectricMotorcycleForum.com

  • November 23, 2017, 11:16:07 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Pages: [1]

Author Topic: 2011 Zero S brake pad replacement  (Read 971 times)

jateureka

  • Newbie
  • *
  • Posts: 29
  • Brisbane QLD Australia
    • View Profile
2011 Zero S brake pad replacement
« on: January 21, 2015, 05:03:13 PM »

The bike I just bought has done less than 13,000km and has no brake pads left!!!
Worn down to the backing metal on the rear brake and only 1mm left on the leading edge on the front brake.

Anybody replaced their brake pads yet or know of any aftermarket brake pads that fit?

Anybody got the workshop instructions or can tell me what the torque settings are for the brake calliper mounting bolts and pad retaining screws?

« Last Edit: January 23, 2015, 06:24:39 AM by jateureka »
Logged
ZEV 7100 LR scooter, 2013
Zero S motorcycle, 2011

jateureka

  • Newbie
  • *
  • Posts: 29
  • Brisbane QLD Australia
    • View Profile
Re: 2011 Zero S brake pad replacement
« Reply #1 on: January 23, 2015, 06:23:29 AM »

I have removed the pads and can see that they are sintered material. I compared the size of the pads to some catalogues and found the following aftermarket pads for the HB Performance calliper models as fitted to the 2011 Zero S:

REAR brake pads:
EBC SFA083HH
Metal Gear 30-067-S http://metalgear.com.au/mgear-brake-pads-sintered-p-5625.html
GOLDfren 047AD


FRONT brake pads:
EBC SFA264HH
Metal Gear 30-160-S http://metalgear.com.au/searchByProduct.php?keywords=30-160&x=0&y=0
« Last Edit: January 23, 2015, 06:33:22 AM by jateureka »
Logged
ZEV 7100 LR scooter, 2013
Zero S motorcycle, 2011

jateureka

  • Newbie
  • *
  • Posts: 29
  • Brisbane QLD Australia
    • View Profile
Re: 2011 Zero S brake pad replacement
« Reply #2 on: January 23, 2015, 06:31:47 AM »

EDIT
torque specification for the brake calliper bolts is detailed on page 5-2 of the Owner's manual as 20Nm with new Loctite blue applied.

Bolts use an M6 Allen key

Pad retaining pins on the front caliper use an M5 Allen key

« Last Edit: January 23, 2015, 10:25:41 AM by jateureka »
Logged
ZEV 7100 LR scooter, 2013
Zero S motorcycle, 2011

jateureka

  • Newbie
  • *
  • Posts: 29
  • Brisbane QLD Australia
    • View Profile
Re: 2011 Zero S brake pad replacement
« Reply #4 on: March 02, 2015, 07:12:27 AM »

Thanks for that, but they don't give the Galfer part number for the Zero, the number they list there is for the brake pad compound for general street use.
The actual Galfer part numbers are FD094 rear, FD188 front
Ferodo part numbers FDB313 rear and FDB2190 front

I did find an ebay listing with Zero OEM pads, the part numbers were 25-0328601 for the rears.
Logged
ZEV 7100 LR scooter, 2013
Zero S motorcycle, 2011

Alan. Yes THAT Alan

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: 2011 Zero S brake pad replacement
« Reply #5 on: September 26, 2017, 10:20:11 PM »

« Last Edit: October 06, 2017, 11:40:31 PM by Alan. Yes THAT Alan »
Logged

igorbaldo

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: 2011 Zero S brake pad replacement
« Reply #6 on: October 18, 2017, 12:29:52 AM »

These pads are also the same used on Suzuki Burgman 125 (front disc).
Logged
Pages: [1]