ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: ZEM Tahiti on October 01, 2016, 10:09:59 AM
-
Does anyone know how to lower the beam of the front light?
Now that we put LED on front, it is too high . So with 2 on board, hi beam is pointing above the road!
Only way we found is to enlarge the holes of the horizontal lower bracket.
-
Headlamp alignment for the S/DS/SR/DSR models is described on 6.17 of the 2016 Zero manual.
Basically, there's an adjustment screw on the upper right side of the rear of the headlamp housing.
-
Thank you for that!